Navigation – Plan du site
Economie alimentaire et alimentation à l’âge du Bronze en Europe : aspects pluridisciplinaires — « ECOALIM »

Bronze Age cooking pots: Thermal properties and cooking methods

Noémi S. Müller, Anno Hein, Vassilis Kilikoglou et Peter M. Day

Résumés

Cet article examine l’alternance entre les paramètres de la fabrication et les propriétés des matériaux des ustensiles en céramique archéologiques servant à la cuisson. Tandis que les études préalables concernant les vaisseaux en céramique étaient axées sur leur réaction aux contraintes mécaniques et thermiques, l’accent ici est mis sur les propriétés thermiques et leur influence sur l’aptitude d’un vaisseau en vue des différentes méthodes de cuisson. Nous montrons comment les propriétés des matériaux d’un vaisseau sont influencées par sa fabrication et de quelle manière enfin ces propriétés des matériaux peuvent influencer à leur tour la sélection de certains vaisseaux quant aux méthodes spécifiques de cuisson, exemple : les vaisseaux de cuisson d’Akrotiri, Grèce, datant de l’âge du Bronze final.

Haut de page

Texte intégral

Introduction

  • 1 Aplastic inclusions, which include for example sand, small rock or mineral fragments, are in many c (...)

1Ceramic cooking vessels gain their characteristic properties during manufacture, where the clay-rich paste is transformed by firing to a hard durable ceramic. Usually ceramic vessels can be exposed to elevated temperatures and are strong and tough enough to survive frequent handling. While composition and microstructure of a ceramic depend on its manufacture, they in turn influence a ceramic’s material properties and, ultimately, performance. Manufacturing parameters which affect composition and microstructure of a clay-based ceramic include the type of clay, the amount, type, size and shape of aplastic inclusions1, and firing regime.

2To date, most discussions of archaeological cooking vessels and their material properties have centred on their ability to withstand the thermal and mechanical stresses they are exposed to in every-day use (e.g. Tite & Kilikoglou 2002). Thermal stresses arise for example when placing a cold vessel on a fire, while mechanical stresses can develop through scrubbing or stirring activities. It is only relatively recently that thermal conductivity, a measure for the heat transfer in a material, has been systematically investigated in relation to archaeological cooking ware (Hein et al. 2008). The thermal conductivity of a material plays a significant role in the heating efficiency of a ceramic and greatly influences the time required to heat up food (Hein et al. submitted).

3When examining the response of archaeological ceramics to mechanical and thermal loads, fracture strength, toughness and thermal shock resistance are considered (Tite et al. 2001). Fracture strength determines the amount of force which can be applied to a material until a crack initiates while toughness is a measure of the energy required for crack initiation and propagation. Thermal shock resistance describes a material's ability to withstand sudden changes in temperature and is popular in discussions which revolve around technological choices in manufacture and the performance of cooking ware (e.g., Tite & Kilikoglou 2002), but also of metallurgical ceramics (Martinón-Torres et al. 2006). Unlike strength and toughness, this is not a material property, but a complex parameter, which depends also on the nature of thermal shock (Müller et al. in press b). The influence of ceramic manufacture on these parameters in view of archaeological material has been reviewed previously (Tite et al. 2001). It has been observed that an increase in firing temperature (Kilikoglou et al. 1998) and decrease in amounts of aplastic inclusions (Steponaitis 1984, Kilikoglou et al. 1995) results in an increase in fracture strength. In contrast, toughness has been observed to increase with decreasing firing temperature and increasing amounts of temper (Kilikoglou et al. 1995). The influence of temper types and shape on strength and toughness was also studied (Feathers 1989, Feathers & Scott 1989, Hoard et al. 1995, Müller et al. 2010). Experimental work on the influence of manufacturing choices on thermal shock resistance (West 1992: 138) concluded that the 'most effective means of improving thermal shock resistance is the addition of tempering material'. In terms of variability of strength levels upon thermal shocking - high amounts of temper material and low firing temperatures appear indeed beneficial for a ceramic’s thermal shock resistance (Müller et al. in press b).

4Most studies of utilitarian ceramics which focused on issues related to technology and performance have been preoccupied with investigating the response of the ceramic to mechanical and thermal stresses as outlined above. Discussions of the material properties of archaeological cooking vessels were typically concerned with the suitability of a vessel for cooking as such, assessing, for example, its ability to withstand cycles of heating and cooling and frequent handling. These were assessed either by material testing (e.g., Bronitsky & Hamer 1986, Feathers & Scott 1989, Skibo et al. 1989, Hoard et al. 1995) or through theoretical considerations (e.g. Rye 1976, Braun 1983). If we consider the requirements that different cooking procedures impose on the material so as to assess the relative suitability of vessels to be used for specific cooking methods, another material property, namely thermal conductivity becomes important and the focus is shifted from absolute considerations towards the affordance of a material for specific cooking processes. Thermal conductivity is linked to heat transfer, a process that is crucial for ceramics employed with heat and which will be discussed in more detail below.

Cooking and heat transfer

5Heat transfer during cooking with the use of a vessel is based mainly on two processes, heat conduction, that is the heat transfer in solids or non-moving fluids due to interaction between the molecules or atoms of the material, and heat convection which is the heat transfer between a solid or fluid surface and a moving fluid with a different temperature. Heat radiation, which is a further heat transfer process, can usually be neglected since temperatures achieved during cooking are still comparably moderate. While different heat transfer processes come into play between vessel and foodstuff, heat transfer within a vessel is determined by heat conduction. Heat conduction is described by the following equation (Kingery et al. 1976):


where dQ/dt is the heat flow through the area A perpendicular to its direction, k is the thermal conductivity and dT/dx the temperature gradient.
If the temperatures are not constant, the temperature development is described by the following partial differential equation:
where is the thermal diffusivity, which is the ratio of the thermal conductivity k and the heat capacity per unit volume ·cp, with , the density of the material, and cp, the heat capacity. Heat transfer within a vessel is thus directed by its material properties, in particular thermal conductivity, but also heat capacity and density, and that is why these material properties are of importance for ceramic vessels exposed to heat.

6A superior thermal conductivity results in an even heat distribution and a pan made of a material with a good diffusivity (and accordingly thermal conductivity) rapidly responds to changes in temperature. In a material with low thermal conductivity, uneven heating creates hot spots, where food can easily be burnt. Materials, in which thermal conductivity and diffusivity are low and heat capacity is relatively high, take longer to reach a steady state condition but they are excellent at retaining the heat once their contents are heated up. It is for their specific thermal properties that today, ceramic vessels are commonly used for slow simmering of stews or casseroles, while materials with higher conductivities are normally chosen to boil or fry foodstuff.

7The second heat transfer process, which has to be considered during cooking, is heat convection. Heat convection emerges between the internal vessel surface and fluid foodstuff, such as soup or milk, but also and between ambient air and the outer surface of the vessel as well as between ambient air and vessel contents. Heat transfer by convection can be described with the following equation :


where h is the convective heat transfer or film coefficient of the fluid, A the area of the surface, T
s the temperature of the surface and T the bulk temperature of the fluid. Apart from the fluid itself, the film coefficient depends on the floating speed, i.e., in the case of the ambient air on the wind speed. In contrast to heat conduction, heat convection is not affected by the properties of the vessel’s material. In terms of technical choices, convection can only be controlled through shape parameters, thus affecting the contact area of the interface between the ceramic vessel and the moving fluid. Also important for cooking processes is the heating efficiency η (Hein et al. submitted), the ratio between the energy Ecook consumed in the actual cooking process and the energy Qheat inserted in the system:

8The higher the heating efficiency is, the faster will the foodstuff be heated during the heating phase, and the less fuel is required to maintain temperature once it is reached. Earlier studies have investigated heat transfer through examining what was termed heating or cooking effectiveness (Skibo et al. 1989, Schiffer 1990, Pierce 2005). While these studies mainly attempted to assess the influence of surface treatment, i.e. vessel shape and permeability, on heating rates, the thermal conductivity of a material plays a significant role in the heating efficiency of a ceramic and greatly influences the time required to heat up food (Hein et al. submitted).

Archaeological cooking ware and cooking methods

9Ceramic clay cooking pots come in many different fabrics: there are differences both in the amount and type of aplastic inclusions present in the clay matrix as well as in firing regimes. So cooking ware from the 3rd millennium BC at Tell Beydar in Syria for example is reported to be relatively low fired with large coarse inclusions (Broeksman et al. 2004), as is the cooking ware from the earlier Bronze Age periods at Akrotiri (Müller 2009). Webb and Frankl (2011), on the other hand, note that the Bronze Age cooking war from Marki in Cyprus, while it is coarser, is also harder-fired than other ceramics, implying that they were exposed to fairly high temperatures. While it appears that in many cases cooking vessels in the Mediterranean during the Bronze Age were coarse and not very high fired, later cooking wares, e.g. from the Roman and Byzantine periods, appear to show a tendency to higher fired, finer pastes. A good example of this is the North African cooking ware that was widely traded in the Roman Empire, particularly during the 3rd and 4th centuries AC, which is high fired and contains relatively fine aplastic inclusions (Leitch 2010, Ikaheimo 2003) As outlined above, these differences in ceramic fabric occur not only over time and space, but also within cooking sets at a site, and reflect differences in raw materials and manufacturing practices employed, such as the addition of particular temper material and the selection of specific firing regimes. Differences in manufacture such as those outlined above may give rise to different material properties of the cooking vessels. This includes their heat transfer properties, which, as noted above, play a crucial role in different cooking practices. While in the archaeological literature the occurrence of new cooking ware shapes is frequently linked to different cooking practices, either taken to reflect an influx of new people with distinctive cooking traditions (e.g. Joyner 2007, Ben-Shlomo et al. 2008) or changes in dietary practices (e.g. Eerkens 2005), the affordance of the material for the different cooking practices postulated has not received as much attention to date.

Case study: Late Cycladic cooking vessels at Akrotiri

10In the following we will illustrate the potential of employing ceramic material properties - and in particular heat transfer - to discuss cooking practices in the Bronze Age site of Akrotiri in Greece. Akrotiri is located in the South Aegean Sea and is an important prehistoric settlement (Doumas 1983). It boasts a remarkable cooking vessel assemblage which is well-represented in successive Bronze Age phases. The Bronze Age cooking ware at Akrotiri shows diachronic variation both in morphology and ceramic fabrics. For the latest phase, Late Cycladic IA (LCIA), two locally produced cooking vessels have been found, the tripod cooking pot and the funnel-mouthed jar. Examination of the archaeological material which included analyses by thin section petrography, scanning electron microscopy, X-ray diffraction and Fourier-transform infrared spectroscopy revealed that both vessel types were made from the same raw materials, a volcanic clay paste tempered with phyllitic material (Müller et al. in press a), but appear to have been fired at different temperatures (fig. 1). The tripod cooking vessels appear to have been exposed to significantly higher firing temperatures than the funnel-mouthed jars, which resulted in differences in microstructure between the two vessel types (Müller 2009, Roumpou et al. in press). Since the same raw materials have been used for all locally produced LCIA cooking vessels at Akrotiri, it is the influence of firing temperature on the material’s properties on which will focus in the following, before looking at the implications for the particular case study.

1.Thin section (above) and scanning electron micrographs (below) of examples of tripod cooking pots and funnel-mouthed jars.

1.Thin section (above) and scanning electron micrographs (below) of examples of tripod cooking pots and funnel-mouthed jars.

As can be seen in the thin section micrographs, there are no differences in raw materials used, but tripod cooking vessels appear to have been exposed to significantly higher firing temperatures: the SEM micrograph of an example of a tripod vessel shows a vitrified matrix (left) while a non-vitrified microstructure of a funnel-mouthed jar is depicted to the right.

Influence of firing on material properties

11In order to assess the influence of potters’ choices on the material properties of the finished vessels, material tests can be employed. Measurements on experimental briquettes are preferred over tests on archaeological material, due to possible alteration of the archaeological material during use and burial, as well as material requirements. For the present example, the case of Bronze Age cooking vessels at Akrotiri, we manufactured model materials in order to assess the influence of particular manufacturing parameters on a series of material parameters, i.e. strength, toughness, thermal shock and thermal conductivity (Müller 2009). Results of these have been published, and for a description of materials and test methods employed as well as for a detailed discussion of results, the reader is referred to the relevant publications for strength and toughness (Müller et al. 2010), thermal shock resistance (Müller et al. in press b) and thermal conductivity (Hein et al. 2008).

12As outlined above, when considering heat transfer and cooking methods, it is thermal conductivity which plays an important role, while when discussing the overall suitability of utilitarian vessels, properties such as strength, toughness or thermal shock are frequently employed. Firing to high temperatures results in an increase in strength, while toughness in most cases decreases with increasing vitrification, due to a change in fracture mode and reduced energy absorption during crack propagation in extensively vitrified ceramic matrices (Kilikoglou et al. 1995, 1998, Müller et al. 2010). Differences, however, are most pronounced in untempered materials, but much less evident in ceramics which contain a relatively high amount of coarse aplastic inclusion, as is the case with many prehistoric cooking vessels. For the same reason, i.e. high amount of aplastic inclusions and subsequent stable fracture mode, it can be argued that also thermal shock resistance was probably sufficient for coarse tempered ceramics when exposed to the temperatures expected for cooking processes (Müller et al. 2012, in press b).

13It is well known that the firing strategy greatly influences a ceramic’s microstructure. Increased firing temperatures result in increasing vitrification, with calcareous clays developing cellular microstructure, while non-calcareous ones develop dense and less porous microstructure (Tite & Maniatis 1975, Tite et al. 1982). Importantly, and as discussed above for strength, toughness and thermal shock resistance, these differences in turn contribute to different physical properties. For thermal conductivity, it has been observed that higher firing temperatures and increasing vitrification of the clay matrix results in an increase of this physical property (Hein et al. 2008), an effect which is usually observed for clay-based ceramics (see also García et al. 2010). The increase of conductivity is related to the development of vitrification and consequent increasing bonding within the ceramic body; while also increased density and lower porosity contributes. Computer modelling using the finite element methods confirms that the different firing temperatures and microstructures result in materials that would afford the cooking vessels with a different behaviour and energy efficiency (Hein et al. in press).

Discussion

14Differences in the manufacture of clay-based ceramics do not only affect strength, toughness and thermal shock resistance, properties which are related to the overall suitability of a vessel to be used in cooking, but also thermal conductivity. High firing temperatures and resultant vitrification of the ceramic body lead to an increase in thermal conductivity. As outlined above, at least in contemporary kitchens, materials with lower thermal conductivity are preferred for simmering food, while for boiling or frying those with higher thermal conductivities are better suited.

15For the case of late Bronze Age cooking ware at Akrotiri, where two different types of locally manufactured cooking vessels were employed for cooking, each fired to a different temperature range, one could therefore contemplate that these two different vessel types - even though they were both used to prepare food - might have been intended or designed for different ways of doing so. In terms of vessel shape, the more open shape of the tripod appears to be better suited to boiling activities, while the more closed funnel-mouthed jar is better for long-term simmering. This is because the heat loss by heat convection is considerably reduced so that the heating energy necessary to maintain the simmer temperature is decreased. One might therefore argue that an adaptation of the cooking vessels in terms not only of their shape, but also of their material properties, namely the adjustment of their thermal properties to specific cooking methods, could have taken place, achieved through firing the ceramic paste to different temperatures. The high firing temperatures which were used in the manufacture of the tripod cooking pot resulted in a higher thermal conductivity beneficial for boiling activities. The funnel mouthed jars on the other side were fired to lower temperatures, which resulted in a lower thermal conductivity better suited for simmering food.

Summary and conclusion

16When examining technological choices in the manufacture of clay-based cooking vessels, it is important to keep in mind that the mechanical and thermal properties of these vessels are connected to their use, the preparation of food. Cooking is inherently related to heat transfer, and the thermal conductivity of a vessel not only influences its overall suitability to be used for cooking food, it also directs the relative suitability of a material to be used for different modes of cooking. For a thorough technical interpretation of the technological variation in ceramic cooking ware production, taking into account the restraints and requirements posed by different cooking practices, a comprehensive examination of ceramic material properties including heat transfer parameters, is a prerequisite.

17The analysis of archaeological cooking vessels in terms of their material properties, ideally coupled with organic residue and archaeobotanical and -zoological analysis, has the potential to support hypotheses such as of the use of different shapes within a cooking ware set for particular types of cooking. Placed in context, the approach presented here is anticipated to contribute to a deeper understanding of food preparation and consumption practices and highlights the importance of integrating different avenues in order to shed light on issues related to culinary practices and diet in the past.

18Acknowledgments
We are grateful to Prof. C. Doumas, director of the Akrotiri excavations, for permission to study the cooking ware of the site and to Dr Irene Nikolakopoulou for assistance with the archaeological samples. Thanks are due to the 21st Ephorate of Prehistoric and Classical Antiquities and the Directorate of Conservation, of the Greek Ministry of Culture, who gave permission to sample. Funding received from INSTAP is further gratefully acknowledged as is support provided through a Maria Curie ITN programme (NARNIA - 265010).

Haut de page

Bibliographie

Braun, D., 1983, Pots as tools, in Archaeological hammers and theories (eds J.A. Moore and A.S. Keene), 107-134, Academic Press, New York.

Ben-Shlomo, D., Shai, I., Zukerman, A., and Maeir, A.M., 2008, Cooking identities: Aegean style cooking jugs and cultural interaction in Iron Age Philistia and neighboring regions, American Journal of Archaeology, 112 (2), 225-246

Bronitsky, G., and Hamer, R., 1986, Experiments in ceramic technology: the effects of various tempering materials on impact and thermal shock resistance, American Antiquity, 51, 89-101.

Broeksman, T, Adriaens, A., and Pantos, E., 2004, Analytical investigations of cooking pottery from Tell Beydar (NE-Syria), Nuclear Instruments and Methods in Physics Section B: Beam Interactions with Materials and Atoms, 226 (1-2), 92-97.

Doumas, C.G., 1983, Thera, Pompeii of the ancient Aegean. Excavations at Akrotiri 1967−79, Thames & Hudson, London.

Eerkens, J.W., 2005, GC-MS analysis and fatty acid ratios of archaeological potsherds from the Western Great Basin of North America, Archaeometry 47 (1), 83-102.

Feathers, J.K., 1989, Effects of temper on strength of ceramics: response to Bronitsky and Hamer, American Antiquity, 54, 579-588.

Feathers, J.K., and Scott, W.D., 1989, Prehistoric ceramic composite from the Mississippi Valley, Ceramic Bulletin, 68 (3), 554-557.

García Ten, J. , Orts, M.J., Saburit, A., and Silva, G., 2010, Thermal conductivity of traditional ceramics. Part I: Influence of bulk density and firing temperature, Ceramics International, 36, 1951–1959.

Hein, A., Müller, N.S., Kilikoglou, V., Day, P.M., 2008, Thermal conductivity of archaeological ceramics: the effect of inclusions, porosity and firing temperature, Thermochimica Acta, 480, 35-42.

Hein, A., Müller, N.S., and Kilikoglou, V., in press, Heating efficiency of archaeological cooking vessels: computer models and simulation of heat transfer, Ceramics Cuisine and Culture, the Archaeology and Science of Kitchen Pottery in the Ancient Mediterranean World.

Hoard, R.J., O’Brien, M.J., Khorasgany, M.G., and Gopalaratnam, V.S., 1995, A materials-science approach to understanding limestone-tempered pottery from the midwestern United States, Journal of Archaeological Science, 22 (6), 823-832.

Joyner, L., 2007, Cooking pots as indicators of cultural change, a petrographic study of Byzantine and Frankish cooking wares from Corinth, Hesperia, 76, 183-227.

Kilikoglou, V., Vekinis, G., and Maniatis Y., 1995, Toughening of ceramic earthenwares by quartz inclusions: an ancient art revisited, Acta Metallurgica et Materialia, 43, 2959-2965.

Kilikoglou, V., Vekinis, G., Maniatis Y., and Day, P.M., 1998, Mechanical performance of quartz-tempered ceramics: part I, strength and toughness, Archaeometry, 40 (2), 261-279.

Kingery, W.D., Bowen, H.K., and Uhlmann, D.R., 1976, Introduction to ceramics, 2nd edition, John Wiley and Sons, Inc., New York.

Leitch, V., 2010, Trade in Roman North African cookwares, Bollettino di Archeologia on line I 2010/ Volume speciale B / B11 / 2, Roma 2008 – International congress of classical archaeology, meetings between cultures in the ancient Mediterranean
(http://151.12.58.75/archeologia/bao_document/articoli/2_LEITCH.pdf), accessed on January 25th, 2012)

Martinón-Torres, M., Rehren, T., Freestone, I.C., 2006, Mullite and the mystery of Hessian wares, Nature, 444 (23), 437-438.

Müller, N.S., 2009, Technology of Bronze Age cooking vessels from Akrotiri, Thera, unpublished PhD thesis, University of Sheffield, Sheffield.

Müller, N.S., Kilikoglou, V., and Day, P.M., in press a, Home-made recipes: Tradition and Innovation in Bronze Age cooking pots from Akrotiri, Thera. Ceramics Cuisine and Culture, the Archaeology and Science of Kitchen Pottery in the Ancient Mediterranean World.

Müller, N.S., Kilikoglou, V., Day, P.M., and Vekinis, G., in press b, Thermal shock resistance of tempered archaeological ceramics. Proceedings EMAC'09, 10th European meeting on ancient ceramics

Müller, N.S., Hein, A., Kilikoglou, V., and Day, P.M., 2012, Modelling thermal stresses in prehistoric cooking ware. in Proceedings of the 5th Symposium of the Hellenic Society of Archaeometry (eds. N. Zacharias, M. Georgakopoulou, K. Polykreti, G. Fakorellis, and T. Bakoulis), 477-491, Papazisi Editions, Athens.

Müller, N.S., Kilikoglou, V., Day, P.M., and Vekinis, G. 2010, The influence of temper shape on the mechanical properties of archaeological ceramics. Journal of the European Ceramic Society, 30, 2457-2465.

Pierce, C., 2005, Reverse engineering the ceramic cooking pot: cost and performance properties of plain and textured vessels, Journal of Archaeological Method and Theory, 12 (2), 117-157.

Roumpou, M., Müller, N.S., Kalogeropoulos, N., Day, P.M., Nikolakopoulou, I., and Kilikoglou, V., (in press), An interdisciplinary approach to the study of cooking vessels from Bronze Age Akrotiri, Thera., in Diet, economy and society in the ancient Greek world: towards a better integration of archaeology and science (eds. Voutsaki, S. and Valamoti, S.-M.). Peeters, Leuven.

Rye, O.S., 1976, Keeping temperature under control: materials and the manufacture of Papuan pottery, Archaeology and Physical Anthropology in Oceania, 11 (2), 106-137.

Schiffer, M.B., 1990, The influence of surface treatment on heating effectiveness of ceramic vessels, Journal of Archaeological Science, 17 (4), 373-381.

Skibo, J.M., Schiffer, M.B., Reid, K.C., 1989, Organic-tempered pottery: an experimental study, American Antiquity, 54 (1), 122-146.

Steponaitis, V.P., 1984, Technological studies of prehistoric pottery from Alabama: physical properties and vessel function, in The many dimensions of pottery (eds. S.E. van der Leeuw and A.C. Pritchard), 79-127, University of Amsterdam, Amsterdam.

Tite, M.S., and Maniatis, Y., 1975, Scanning electron microscopy of fired calcareous clays, Transactions and Journal of the British Ceramic Society, 74 (1), 19-22.

Tite, M.S., and Kilikoglou, V., 2002, Do we understand cooking pots and is there an ideal cooking pot?, in Modern trends in scientific studies on ancient ceramics (eds. V. Kilikoglou, A. Hein, and Y. Maniatis), 1-8, BAR International Series 1011, Archaeopress, Oxford.

Tite, M.S., Kilikoglou, V., Vekinis, G., 2001, Strength, toughness and thermal shock resistance of ancient ceramics, and their influence on technological choice, Archaeometry, 43 (3), 301-324.

Tite, M.S., Freestone, I.C., Meeks, N.D., and Bimson, M., 1982, The use of scanning electron microscopy in the technological examination of ancient ceramics, in Archaeological ceramics (eds. J.S. Olin and A.D. Franklin), 109-120, Smithsonian Institution Press, Washington, D.C.

West, S.M., 1992, Temper, thermal shock and cooking pots: a study of tempering materials and their physical significance in prehistoric and traditional cooking pottery, Unpublished M.Sc. thesis, University of Arizona, Tucson.

Haut de page

Notes

1 Aplastic inclusions, which include for example sand, small rock or mineral fragments, are in many cases naturally present in the sediments employed in ceramic manufacture, but they can also be added by the potter, e.g. to enhance working or drying properties of the plastic clay, or to regulate properties of the final product.

Haut de page

Table des illustrations

URL http://pm.revues.org/docannexe/image/737/img-1.jpg
Fichier image/jpeg, 20k
URL http://pm.revues.org/docannexe/image/737/img-2.jpg
Fichier image/jpeg, 20k
URL http://pm.revues.org/docannexe/image/737/img-3.jpg
Fichier image/jpeg, 16k
URL http://pm.revues.org/docannexe/image/737/img-4.jpg
Fichier image/jpeg, 20k
Titre 1.Thin section (above) and scanning electron micrographs (below) of examples of tripod cooking pots and funnel-mouthed jars.
Légende As can be seen in the thin section micrographs, there are no differences in raw materials used, but tripod cooking vessels appear to have been exposed to significantly higher firing temperatures: the SEM micrograph of an example of a tripod vessel shows a vitrified matrix (left) while a non-vitrified microstructure of a funnel-mouthed jar is depicted to the right.
URL http://pm.revues.org/docannexe/image/737/img-5.jpg
Fichier image/jpeg, 573k
Haut de page

Pour citer cet article

Référence électronique

Noémi S. Müller, Anno Hein, Vassilis Kilikoglou et Peter M. Day, « Bronze Age cooking pots: Thermal properties and cooking methods », Préhistoires Méditerranéennes [En ligne], 4 | 2013, mis en ligne le 29 août 2014, consulté le 18 août 2017. URL : http://pm.revues.org/737

Haut de page

Auteurs

Noémi S. Müller

Institute of Materials Science, NCSR Demokritos, 15310 Aghia Paraskevi, Attiki, Greece - nmueller@ims.demokritos.gr

Anno Hein

Institute of Materials Science, NCSR Demokritos, 15310 Aghia Paraskevi, Attiki, Greece - hein@ims.demokritos.gr

Vassilis Kilikoglou

Institute of Materials Science, NCSR Demokritos, 15310 Aghia Paraskevi, Attiki, Greece - kilikog@ims.demokritos

Peter M. Day

Department of Archaeology, University of Sheffield, Northgate House, West Street, Sheffield S1 4ET, UK - p.m.day@sheffield.ac.uk

Haut de page

Droits d’auteur

Tous droits réservés

Haut de page